Waterproof Inkjet Milky Transparency Film 8.5" x 11" - 50 Sheets/Pack

Warm Tips:Printing side is the non-smooth side, wet finger will stick to the coated side Film Inkjet Milky Transparency Film allows screen printers to output films faster, use less ink, achieve ultimate black density and reuse the film positive time and time again. Description: Size:8.5" x 11" , 50 Sheets/pack Caliper/ thickness: 5 mil Ink Support:dye/pigment(water based) UV DMIN <1.0 UV DMAX >4.0 Printing side is the non-smooth side, wet finger will stick to the coated side. < Features and Benefits: Dimensionally stable film means great registration and no curling Quick dry time equals faster production times and less ink usage Accurate dot placement results in excellent line definition and acuity High ink load capacity Great film opacity Minimal "yellowing" allows the film to retain the image over time and be used repeatedly < Storage Instructions: Temp 59 - 86° degrees F (15 - 30° C) Repack opened rolls or boxes when not in use Allow material to stabilize to room conditions for 24 hours before use Product Support Information: Side of the film to print on: waterproof film has two sides, the carrier sheet side and the inkjet receptive side. To determine which side is the inkjet receptive side, dampen your finger and touch a corner of the film, the side that is sticky is the side that will take ink. Printer Settings for Best Results: Epson or other inkjet printers: Open your printer utility driver in the print queue menu. Set your image settings to "best quality photo" or "best image", this will enable your printer to print at its max resolution. Set your paper settings to "premium Glossy Photo Paper" or similar, this allows most printers to lay down the maximum amount of ink.