Chlorine Test - Adjustment Point: Before using for the first time, adjust the tester to the test pool water or hot spring water in the following order: 1. Test the swimming pool water or hot spring water with the traditional liquid test tool; Chlorine readings to spare (1.5PPM); 3. No need to adjust the PH. To find the adjustment point of the tester: A. Place an AA 1.5 V battery (positive up) in the battery compartment of the handle. B. Hold the tester in one hand and the other with a test stick. C. Insert the cleaned metal rod into the water to the black position. D. gently stir the water with metal rods. E. When the metal rod is kept in the water, keep the front knob of the table in the CL direction to no longer move. And then slowly turn right until the pointer points to the position of the result measured by the traditional liquid test tool (eg 1.5). F. Remove the test stick from the water. Be careful not to move the knob. The pointer will slide to the right, in A and E between a letter to stop. This letter is the point of adjustment. Note: Each time you test chlorine, you must first adjust the table to the "adjustment point".
Test pH: The recommended chlorine content for swimming pool water or hot spring water is 7.2 to 7.8 A) The company has always been to "high-quality, high efficiency, new technology, new management" for the purpose. "Innovation and development, quality first, customer first" business philosophy, to provide customers with creative and innovative spirit of all kinds of products.
1. Swimming pool, sauna and spa essential tools
2. The ideal tool for simply measuring the pH and C12 values of water
3. No chemical composition, no need to use the speculation to measure
4. Safe measurement of chlorine content within the scope of the level: 1.2-1.7ppm
5. The pH level of the safety measurement range: 7.2-7.8
6. Battery: Use 1 AA battery
