Washing Machine Hoses, 6ft Washer Hose Burst Proof- Stainless Steel Braided Laundry Hose Hot and Cold Water Supply Hoses for Washing Machines, 2 PACK

This premium set of Stainless Steel Washing Machine Hoses are designed to handle the stresses of the laundry room - extreme hot and cold temperatures, countless hours of use in cramped spaces and the agitation and friction from a running washing machine. 6 Feet of supply hose means you can move the washer around for retrieving lost clothes or normal maintenance - without having to disconnect the washing machine inlet hose every time. You wont have to strain your self reaching into awkward positions to connect and disconnect a washer hose that is too short. Pick up our Kelaro Brand washing machine connectors and compare them to any other off the shelf washer hoses. You will feel the high quality materials and workmanship. The weight alone shows these are heavy duty. Don't risk inferior rubber or other low quality hoses leaking water and damaging your home and property. INSTALLATION INSTRUCTIONS: Make sure supply taps are turned OFF. 1. Remove old hoses from supply taps. 2. Hand-tighten your new supply hoses onto the supply taps. 3. Then give another turn each with a pair of pliers (we recommend using tongue-and-groove pliers, as shown in the photo above. 4. Locate supply inlets on your washing machine. They should be labeleled "HOT" and "COLD", but in case they are not then you can assume that the HOT is on the left (like the picture above) and the COLD is on the right. 5. Hand-tighten the other end of your new supply hoses onto the corresponding inlets on your washer (hot to hot, cold to cold). 6. Then give another turn each with a pair of pliers. You may now turn ON your supply taps. NOTE: Before testing your washing machine, please ensure that your discharge (drain) hose is installed properly as well. Package included: 2 Pack