43300 pneumatic fan clutch wrench set replacement for Ford GM Chrysler Jeep
For some GM 4.3L, 5.0L, and 5.7L equipped vehicles (if not all of them), you'll need to remove the upper half of the plastic fan shroud before you begin to remove the fan clutch
Specification:
Color: Black
Material: Steel
Size: 7/8", 32mm, 36mm, 40mm, 47mm, 1-7/8" and 2"
Removal Procedures:
1. You should leave the serpentine belt on in order to loosen the fan clutch.
2. Choose the correct size wrench and place it on the fan clutch.
3. Place the straight pneumatic extension on the wrench.
4. Place the 3/8 drive deep socket on the end of the pneumatic extension.The socket is used to protect the end of the pneumatic extension from the hammer blows you'll need to give it to loosen the fan clutch.
5. With your hammer, hit the socket placed over the pneumatic extension end. The idea here is to hammer the fan clutch tool so that it will rotate the fan clutch counter-clockwise.
Tip: If you do have an impact air hammer (pneumatic hammer), you can skip step 4, since you can now use the impact air hammer instead of a hammer and 3/8 drive socket.
Package Including
1 x Handle as pictured
1 x 7/8" Driving Wrench
1 x 1-7/8" driving wrench
1 x 2" Driving Wrench
1 x 32mm Driving Wrench
1 x 36mm Driving Wrench
1 x 40mm Driving Wrench
1 x 47mm Driving Wrench
1 x Store bag
For some GM 4.3L, 5.0L, and 5.7L equipped vehicles (if not all of them), you'll need to remove the upper half of the plastic fan shroud before you begin to remove the fan clutch
Specification:
Color: Black
Material: Steel
Size: 7/8", 32mm, 36mm, 40mm, 47mm, 1-7/8" and 2"
Removal Procedures:
1. You should leave the serpentine belt on in order to loosen the fan clutch.
2. Choose the correct size wrench and place it on the fan clutch.
3. Place the straight pneumatic extension on the wrench.
4. Place the 3/8 drive deep socket on the end of the pneumatic extension.The socket is used to protect the end of the pneumatic extension from the hammer blows you'll need to give it to loosen the fan clutch.
5. With your hammer, hit the socket placed over the pneumatic extension end. The idea here is to hammer the fan clutch tool so that it will rotate the fan clutch counter-clockwise.
Tip: If you do have an impact air hammer (pneumatic hammer), you can skip step 4, since you can now use the impact air hammer instead of a hammer and 3/8 drive socket.
Package Including
1 x Handle as pictured
1 x 7/8" Driving Wrench
1 x 1-7/8" driving wrench
1 x 2" Driving Wrench
1 x 32mm Driving Wrench
1 x 36mm Driving Wrench
1 x 40mm Driving Wrench
1 x 47mm Driving Wrench
1 x Store bag
