Walnut wood veneer sheet 11" x 8" on phenolic laminate backer 1/16" A grade

Walnut wood veneer 11" x 8" with phenolic laminate backer overall thickness 1/16" A grade quality. Grain runs shorter direction. The backer is similar to what is on Formica laminate type of products but the front is real wood. Mild figuring in each piece. Some photos may show other sizes, customer projects and wet or finished veneer. Walnut is a gray or black color until it is finished and it will become a warmer brown. Grain runs longer direction. Ships flat in between thick cardboard with application instructions. Contact cement is best. Will require some flattening prior to lamination. Other sizes, backers and raw veneer are available. Also shown are wood veneer scraper tool and contact cement (sold separately). Some sun struck discoloration may be visible from light exposure, but this will sand off and brighten when finished and be beautiful brown as Walnut should be. Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness: (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” Phenolic backed veneer = Exported By ExportYourStore