Wall Texture 10 oz, Orange Peel, Water Based Aerosol Wall Texture

Homax orange peel water-based wall texture is a low-odor, water-based formulation of our most popular “orange peel” and splatter texture for textured drywall repair. Variations in orange peel texture (also called splatter or eggshell) help hide surface imperfections, while reflecting light and adding interest to a room. Our water-based formula excels at replicating orange peel texture patterns so you can get professional results fast. Great for patching and texturing small rooms and accent walls. Homax orange peel water based texture is the fastest way to patch “orange peel” drywall textures. To achieve the best results, please read the following directions carefully before you begin your wall repair project. Water-based, use warm water for cleanup. Sprays best between 68? F and 72? F. For a finer texture, run can under warm water. Directions for use: make any necessary wall repairs before applying. For best results, prime/seal area before and after applying texture. Shake can vigorously for one minute prior to use. Twist off safety tab from nozzle. Always practice spraying on cardboard or scrap drywall to determine preferred pattern. Pointing away from face, adjust dial to desired pattern. Clockwise for fine. Straight up for medium. Counter clockwise for heavy. Spray at a distance of 24”-36” from wall using a circular, or quick sweeping motion. Apply in random pattern, covering only 80-90 percent of surface. Shake can occasionally throughout use. Dry time: allow to dry 5-30 minutes (depending on heaviness of texture) before priming and painting. Heavier textures may require a longer dry time. To store, clear nozzle by turning can upside and spraying until texture is cleared.