installation procedure
Step 1: Drill 1-1/8inch hole.
Step 2:Drop the fitting male piece inside.
Step 3: Pick up the fitting from outside.
Step 4: Tighten the nut.
Step 5:Wrap with thread tape.
Step 6:Tighten the faucet clockwise.
Step 1: Drill 1-1/8inch hole.
Step 2:Drop the fitting male piece inside.
Step 3: Pick up the fitting from outside.
Step 4: Tighten the nut.
Step 5:Wrap with thread tape.
Step 6:Tighten the faucet clockwise.
