Material:
Resin Casting Molds are made of silicone,flexible and soft.
Size of the Wine Holder Molds:
255*105mm/10.03*4.13inch
Depth of the mold: 1cm/0.39inch
Diameter of the middle hole: 32mm/1.25inch
Diameter of the both sides hole: 14mm/0.55inch
Mold Weight: 68g/0.15lb
Size of the Silicone Coaster Molds:
Diameter is 13cm/5.11 inch
Wide application:
Silicone resin molds for Wine Holder making is good choice for DIY handicrafts,you can making coaster and holder with family member, children ,friends,schoolmate or colleague.
How to make:
1.To pour the resin into the silicone molds at first
2.Adding glitter or pigment into it if you need
3.Mix them well and wait it dry out during 24 hours de-mould
How to storage:
Please clean the resin molds and storage the silicone casting molds away from the direct sunlight and dust.
How to de-mould:
You can use a mold release spray or a drop of soap mix with a bit of water as a release agent
Package includes:
1 x Wine Holder resin molds
2 x Coaster Resin Molds
Warm Tips:
--Please make sure your resin piece is fully cured when you decide to demould.
--If any question,please contact to us at first
