Vanjunn Joycon Repair Tool Kit for Nintendo Switch- 2 pack Analog 3D Thumb Stick Replacement Thumb Stick for Nintendo Switch Joystick with Screwdrivers and Thumbstick Caps

VANJUNN Repair Tool Kit for Nintendo Switch Joycon Joystick with Screwdrivers and Thumbstick Caps(2pcs PACK ) NOTE: * The original screws of joy con controller are very fragile. If the force is too much and fast, it will easily lead to the screw slip/torn. So please be careful and slowly. * When you open the first shell of the joy con with Y screwdriver , Please make sure the screwdriver 90 degrees vertically to the shell. * If you feel the screw caps slipy, press down a little bit and gently screw it with the screwdriver . If still you broke the screws by accident, please do not panic, Use the back up screws in the repair kit * The controller Joycon joystick replacement repair kit is working for both left and right joycon controller stick. * After repairment, sometimes you need to calibrate the joystick by Nintendo switch setting. Brief Steps to Repaire replace the joycon sticks by yourself: 1.Remove the 4 screws. 2.Use the pry bar to open the shell 3.Pry out the battery 4.Use the cross screwdriver to remove 5 screws 5.Slowly remove the middle compartment, open the cable valve and take out the cable with tweezers 6.Open the two cable valves next to the joystick, then take out the cable, and remove the two screws 7.Replace the new joystick. Screw back the two screws on the joystick, insert the cable with the tweezers, and close the cable valve 8.Connect the cable of the compartment with tweezers, close the cable valve, cover the middle compartment and screw back the screw Package include: - 2 x Replacement Joystick for Nintendo Switch Joy-Con - 4 x Thumbstick Caps - 6 x screws (4 housing screws, 2 internal screws) - 1 x "+" Cross Screwdriver(1.5+) - 2 x "Y" Tri-wing Screwdriver (1.5Y & 2.0Y) - 1 x tweezer - 1 x pry tool We here offer: NO-Hassle 6 months money-back/replacement within 12-hour response.