V6 Extruder Hotend 1.75mm / 0.4mm for 3D Printer RepRap Kit + Extra Parts,Brass Print Head,Nozzle Throat,Volcano Heating Block, All Metal

Item Descriptions:-With PTFE in hot regions of our HotEnd we can reach 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 280C.-This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest v6 hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.-Our new HeaterBlock gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C to 200C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease.-The new thermistor placement means you get the most accurate temperature readings with the fastest response.Package:1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor1 x Heatsink shroud with 12V 0.13A High Speed Fan 3010S1 x One meter long bowden PTFE tubing 4mm OD 2mm ID1 x Pneumatic Straight Fitting to connect to extruder cold end 1 x Volcano Heating block 4 x long nozzles 2 x Throat with Tube 1 x 0.3mm Nozzle,1 x 0.4mm Nozzle,1 x 0.5mm NozzleItem Specifications:Color:as the photo showType: E3DV6Voltage: 12V100k Thermistor:Material: All metalNozzle diameter£º0.4mm:Suitable for 1.75mm filament:Brand:Unbranded/Generic