Great Sensors for Arduino Project. Having Fun With Electronics and Programming!
Module Working Principle:
HC-SR04+ is a wide range voltage work ultrasonic distance measurement module. Fully compatible with the old version HC-SR04.
Pull the Trig pin to high level for more than 10us impulse, the module start ranging.
The module automatically sends eight 40KHz square wave to detect whether a signal is returned.
Finished ranging, If you find an object in front, Echo pin will be high level, and based on the different distance, it will take the different duration of high level.
So we can calculated the distance easily.The distance=((Duration of high level)*(Sonic:340m/s))/2
The interval between two tests should be more than 150ms.
Not suitable for testing irregular objects and cotton objects.
Wiring Instructions:
VCC ---- DC 3V-5.5V
GND ---- Ground Wire
Trig ---- Control End
Echo ---- Receiving End
Specification:
Working Voltage: DC 3V-5.5V
Level Output: High 5V Low 0V
Induction Angle: <15°
Detection Range:
5V: 2-450cm (0.79"-177")
3.3V: 2-400cm (0.79"-157.48")
Accuracy: Up to 0.3cm (0.12")
PCB Size: 45 x 21mm / 1.77" x 0.83" (L*W)
Fixed Hole Diameter: 2mm
Package Includes:
2 x HC-SR04+ Distance Sensor (Not Include Jumper Wires)
Module Working Principle:
HC-SR04+ is a wide range voltage work ultrasonic distance measurement module. Fully compatible with the old version HC-SR04.
Pull the Trig pin to high level for more than 10us impulse, the module start ranging.
The module automatically sends eight 40KHz square wave to detect whether a signal is returned.
Finished ranging, If you find an object in front, Echo pin will be high level, and based on the different distance, it will take the different duration of high level.
So we can calculated the distance easily.The distance=((Duration of high level)*(Sonic:340m/s))/2
The interval between two tests should be more than 150ms.
Not suitable for testing irregular objects and cotton objects.
Wiring Instructions:
VCC ---- DC 3V-5.5V
GND ---- Ground Wire
Trig ---- Control End
Echo ---- Receiving End
Specification:
Working Voltage: DC 3V-5.5V
Level Output: High 5V Low 0V
Induction Angle: <15°
Detection Range:
5V: 2-450cm (0.79"-177")
3.3V: 2-400cm (0.79"-157.48")
Accuracy: Up to 0.3cm (0.12")
PCB Size: 45 x 21mm / 1.77" x 0.83" (L*W)
Fixed Hole Diameter: 2mm
Package Includes:
2 x HC-SR04+ Distance Sensor (Not Include Jumper Wires)