uxcell Analog Multimeter Tester Meter AC DC Voltmeter Ammeter Ohmmeter Analog Multimeter Voltage Current Resistance Measurement

Specification: Product Name : Multimeter Power supply mode: 9/1.5V battery DC Current : 0-0.05mA-0.5mA-5mA-50mA-500mA,Accuracy : 2.5 (5A)10A , Accuracy : 5 DC Voltage : 0-0.25V-0.5V-1V-2.5V-10V-50V-250V,Accuracy : 2.5 250V-500V-1000V,Accuracy : 2.5 2500V,Accuracy : 5 AC Voltage : 0-10V-50V-250V-500V-1000V-2500V,Accuracy : 5 Battery Power Measurement : 1.2V,1.5V,2V,3V,3.6V,9V(RL=7.5-8ohm 9V RL=190ohm) Test Pen Length : 73cm/28.74inch Probe Length : 13mm/0.51inch Total Size : 190 x 120 x 50mm/7.48 x 4.72 x 1.97inch(L*W*H) Package Content: 1 x Multimeter ,1 Pair Test Pen , 1 x 1.5V Battery , 1 x 9V Battery , 5 x 0.5A Protective Tube Description: 1.Multimeter measures AC currents, AC/DC voltage, DC resistance, and also provides diode tests, battery power tests temperature measurement, capacitance measurement, LI measurement , load voltage measurement , infrared remote control detection and so on. 2.Voltage&Current Test - No battery required.Voltage and current can be tested without installing batteries normally. 3.TO AVOID ELECTRICAL SHOCK, REMOVE INPUTS BEFORE OPENING CASE.TO PREVENT FIRE OR BURNT,INSTALL FUSE WITH AMPERE/VOLT PATINGS SHOWN:F 0.5A/250. Note: It is strictly forbidden to put the gear of the multimeter in DC current to test the voltage. Because all multimeter current gear can not carry voltage in the instrumentation industry, this operation will cause the consequences of burning circuit boards, please use them carefully after referring to the instructions.