Great Sensors for Arduino Project. Having Fun With Electronics and Programming!
Description:
Onboard TTP226(SSOP-28) capacitive touch sensor IC 8 keys.
Provides 8 separate output pins. Limited to 8-key direct output mode.
8 board-level status indicators.
The module can set direct mode, matrix mode and serial mode.
High-level effective output or low-level effective output selection.
Usage:
Light up the indicator when you put your finger on the board number.
Sensitivity can adjust by the capacitance.
It takes 0.5-1 seconds to stabilize after power-on. Do not touch the button panel during this time.
Specification:
Working Voltage: 2.4V-5.5V
PCB Board Size: 46mm x 47.5mm (L*W)
Pin Quantity: 11
Pin Distance: 2.54mm
Fixed Hole Dia.: 2.7mm
Fixed Hole Distance: 40mm / 1.57"
Description:
Onboard TTP226(SSOP-28) capacitive touch sensor IC 8 keys.
Provides 8 separate output pins. Limited to 8-key direct output mode.
8 board-level status indicators.
The module can set direct mode, matrix mode and serial mode.
High-level effective output or low-level effective output selection.
Usage:
Light up the indicator when you put your finger on the board number.
Sensitivity can adjust by the capacitance.
It takes 0.5-1 seconds to stabilize after power-on. Do not touch the button panel during this time.
Specification:
Working Voltage: 2.4V-5.5V
PCB Board Size: 46mm x 47.5mm (L*W)
Pin Quantity: 11
Pin Distance: 2.54mm
Fixed Hole Dia.: 2.7mm
Fixed Hole Distance: 40mm / 1.57"
