uxcell 695ZZ Deep Groove Ball Bearing 5x13x4mm Double Shielded ABEC-3 Bearings 10-Pack

NOTE? Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description: Single-row, pre-lubricated, normal accuracy. Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance. Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on. Selecting Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced NBR (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification: Model: 695ZZ Shield Type: Double Shielded Inner Race/Outer Race Material: Chrome Steel (GCr15) Cage Material: Stamping Steel Inner Diameter (d): 5mm Outer Diameter (D): 13mm Thickness (B): 4mm Dynamic Load Rating (Cr): 1.077kN Static Load Rating (Cor): 0.432kN Accuracy Class: P6 (ABEC-3) Noise Level: Z1 Number of Pack: 10 Pcs