Feature:
Stamp size on the surface, convenient to pick the one you need.
The hole of the print nozzle is consistent in size and machining, the thread is clean and well-formed.
Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL etc.
Specification:
Fit for 3D Printer: V6
Material: Brass
Screw Thread: M6
Thread Length: 16mm
Nozzle Diameter: 0.4mm-0.6mm-0.8mm-1mm-1.2mm
Input Diameter: 2mm
Fit Filament Diameter: 1.75mm
Overall Size: 21 x 7 mm / 0.83 x 0.28 inch (L*D)
Package Content:
1 x 0.4mm Nozzle
1 x 0.6mm Nozzle
1 x 0.8mm Nozzle
1 x 1mm Nozzle
1 x 1.2mm Nozzle
NOTE:
After replacing the nozzle, please recalibrate the distance between the nozzle and build plate to ensure the quality of print parts.
How to Replace Nozzles?
1: Turn on the 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).
2: After heat finishing, close the printer, take the spanner to hold the heat block. Then use a socket screwdriver to screw the old nozzle extruder out.
Notice: Please don’t touch the old nozzle
3: Spanner keeps to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.
Stamp size on the surface, convenient to pick the one you need.
The hole of the print nozzle is consistent in size and machining, the thread is clean and well-formed.
Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL etc.
Specification:
Fit for 3D Printer: V6
Material: Brass
Screw Thread: M6
Thread Length: 16mm
Nozzle Diameter: 0.4mm-0.6mm-0.8mm-1mm-1.2mm
Input Diameter: 2mm
Fit Filament Diameter: 1.75mm
Overall Size: 21 x 7 mm / 0.83 x 0.28 inch (L*D)
Package Content:
1 x 0.4mm Nozzle
1 x 0.6mm Nozzle
1 x 0.8mm Nozzle
1 x 1mm Nozzle
1 x 1.2mm Nozzle
NOTE:
After replacing the nozzle, please recalibrate the distance between the nozzle and build plate to ensure the quality of print parts.
How to Replace Nozzles?
1: Turn on the 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).
2: After heat finishing, close the printer, take the spanner to hold the heat block. Then use a socket screwdriver to screw the old nozzle extruder out.
Notice: Please don’t touch the old nozzle
3: Spanner keeps to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.