Description:
1.These connectors for RGB multi-color Waterproof LED light strips.
2.You can attach it with your light strips directly without any tools or wielding operations.
3.LED Light Strip Connector better than the corner connectors because you do not waste space with the wires that connect them, the two strips literally join together right at this connector.
4.Endless Possibilities. Use it on cabinets, toe-kicks, shelving or displays - in kitchens, bedrooms, living rooms or anywhere else.
Specification:
Product Name: 5050 3528 LED Strip Connector
Material: Plastic
Type: 4P Connector
Fit for: 10mm 5050 3528 RGB Waterproof LED Strip Light
Size: 16 x 16 x 9mm / 0.63-inch x 0.63-inch x 0.35-inch (L*W*H)
Color: White
Weight: 19g
Package Content: 10 Pcs x 5050 3528 LED Strip Connector
Installation Instructions:
1.Open the clip on the side
2.Slid the LED light strip inside the clip underneath the two contact prongs
3.Make sure the side of the strip aligns with the "+ -" polarity
4.Close the wire clip
Installation Tips:
1.MAKE SURE you put the led strip under the poles and not on top.
2.Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side.
1.These connectors for RGB multi-color Waterproof LED light strips.
2.You can attach it with your light strips directly without any tools or wielding operations.
3.LED Light Strip Connector better than the corner connectors because you do not waste space with the wires that connect them, the two strips literally join together right at this connector.
4.Endless Possibilities. Use it on cabinets, toe-kicks, shelving or displays - in kitchens, bedrooms, living rooms or anywhere else.
Specification:
Product Name: 5050 3528 LED Strip Connector
Material: Plastic
Type: 4P Connector
Fit for: 10mm 5050 3528 RGB Waterproof LED Strip Light
Size: 16 x 16 x 9mm / 0.63-inch x 0.63-inch x 0.35-inch (L*W*H)
Color: White
Weight: 19g
Package Content: 10 Pcs x 5050 3528 LED Strip Connector
Installation Instructions:
1.Open the clip on the side
2.Slid the LED light strip inside the clip underneath the two contact prongs
3.Make sure the side of the strip aligns with the "+ -" polarity
4.Close the wire clip
Installation Tips:
1.MAKE SURE you put the led strip under the poles and not on top.
2.Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side.
