Description:
1.These L shape connectors for RGB multi-Color light strips comes with 2 easy-clasp connectors and a 90 degree L shape PCB board.
2.You can attach it with your light strips directly without any tools or wielding operations.
3.The wireless design ensures seamless layout when you need to spring your light strips around sharp corners.
4.They are compatible with both non-waterproof and waterproof RGB light strips.
Specification:
Product Name: 5050 LED Strip Connector
Material: Plastic
Type: 4P 2 Way Connector ( L Shape)
Fit for: 10mm 5050 RGB LED Strip Connector
Size: 32 x 32 x 5mm / 1.26-inch x 1.26-inch x 0.2-inch (L*W*H)
Color: White
Weight: 33g
Package Content: 15 Pcs x 5050 LED Strip Connector
Installation Instructions:
1.Open the clip on the side
2.Slid the LED light strip inside the clip underneath the two contact prongs
3.Make sure the side of the strip aligns with the "+ -" polarity
4.Close the wire clip
Installation Tips:
1.Open the cap on the connector and slide in the ribbon.
2.Make sure the poles match correctly, then clasp the cap.
3.For waterproof light strips, you need to peel off the silicone around the soldering line first.
4.To avoid electric shock and burn, please turn off the power before cutting and reattaching light strips.
1.These L shape connectors for RGB multi-Color light strips comes with 2 easy-clasp connectors and a 90 degree L shape PCB board.
2.You can attach it with your light strips directly without any tools or wielding operations.
3.The wireless design ensures seamless layout when you need to spring your light strips around sharp corners.
4.They are compatible with both non-waterproof and waterproof RGB light strips.
Specification:
Product Name: 5050 LED Strip Connector
Material: Plastic
Type: 4P 2 Way Connector ( L Shape)
Fit for: 10mm 5050 RGB LED Strip Connector
Size: 32 x 32 x 5mm / 1.26-inch x 1.26-inch x 0.2-inch (L*W*H)
Color: White
Weight: 33g
Package Content: 15 Pcs x 5050 LED Strip Connector
Installation Instructions:
1.Open the clip on the side
2.Slid the LED light strip inside the clip underneath the two contact prongs
3.Make sure the side of the strip aligns with the "+ -" polarity
4.Close the wire clip
Installation Tips:
1.Open the cap on the connector and slide in the ribbon.
2.Make sure the poles match correctly, then clasp the cap.
3.For waterproof light strips, you need to peel off the silicone around the soldering line first.
4.To avoid electric shock and burn, please turn off the power before cutting and reattaching light strips.
