FEATURE
1. Lamp's Structure and Applications:
A. PC body with features of waterproof, dust-proof, novel structure, etc.
B. Mainly apply to outdoor,moist places ,such as factory, parking lot,warehouse etc.
2. Main Technical Data:
A. Rated Input Voltage: 110-130V~50/60Hz
B. Anti-electric Shock Rate: ll
C. lP Rank: IP66
D. CRI:?80
E. Beam Angle: 120°
F. Working Temp: -25°C bis 40°C
3. Installation Requirements & Maintenance:
A. First,sort out all the supporting components and attachments.
B. Only professional electrician can install this lamp. Cut off the power before install this lamp.
C. Make sure this lamp is fastened on the surface of the installation object before the following operation.At last,turn on the power to light up.
Hanging Installation :
1. Drill holes in right position of the ceiling; if the ceiling
is wooden, can directly screw the screw.
2. Screw the screw gecko into the hole.
3. Fix the screws on the ceiling.
4. The hanging wires rope through the accessories.
5. Screw the male stainless steel connector into the female stainless steel connector.
6. Insert the lamp into the accessories.
7. For the clip, nomral condition is fixing tightly, press down cam loosen the steel wire, easy for adjusting height.
8. Plug in the power cord, there is a switch on the power cord.
1. Lamp's Structure and Applications:
A. PC body with features of waterproof, dust-proof, novel structure, etc.
B. Mainly apply to outdoor,moist places ,such as factory, parking lot,warehouse etc.
2. Main Technical Data:
A. Rated Input Voltage: 110-130V~50/60Hz
B. Anti-electric Shock Rate: ll
C. lP Rank: IP66
D. CRI:?80
E. Beam Angle: 120°
F. Working Temp: -25°C bis 40°C
3. Installation Requirements & Maintenance:
A. First,sort out all the supporting components and attachments.
B. Only professional electrician can install this lamp. Cut off the power before install this lamp.
C. Make sure this lamp is fastened on the surface of the installation object before the following operation.At last,turn on the power to light up.
Hanging Installation :
1. Drill holes in right position of the ceiling; if the ceiling
is wooden, can directly screw the screw.
2. Screw the screw gecko into the hole.
3. Fix the screws on the ceiling.
4. The hanging wires rope through the accessories.
5. Screw the male stainless steel connector into the female stainless steel connector.
6. Insert the lamp into the accessories.
7. For the clip, nomral condition is fixing tightly, press down cam loosen the steel wire, easy for adjusting height.
8. Plug in the power cord, there is a switch on the power cord.
