USB UART CableUSB to TTL Serial Adapter Cable 5V FTDI Chip 6 Pin 6ft18m Logic Level 50V

6-Foot FT232RL FTDI USB to TTL serial adapter cable for 5.0V logic level serial communication

It is built with FTDI FT232 chip, FTDI's royalty-free VCP allow for communication as a standard COM port and D2XX 'direct' drivers provide DLL application programming interface; a great conversion data cord to meet with your needs of debugging, boot-loading, programming, etc.

NOTE: If any installation or usage issues, please email us or you may download a driver and usage guide on FTDI official website

The original FTDI chip is embedded in the USB-A end; 6 way 0.1" header connector with VCC (5.0V power) and GND (ground), as well as RXD, TXD, RTS and CTS at 5.0 V logic level.

Applications:

Upgrading Legacy Peripherals to USB

Interface Microcontroller UART or I/O, FPGA / PLD to USB

Replace MAX232 type level shifters allowing for direct connection of products to PC

Industrial Control / USB Software / Hardware Encryption Dongles

Features

- The I/O pins of the FTDI wire are configured to operate at 5.0V logic level;

- Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking;

Specific

Interfaces: USB 2.0 type A Male Port ; 6 pin Female Socket Header

Supports Windows 2008, XP and XP 64-bit, Vista and XP 64-bit, CE 4.2, 5.0 and 6.0; Windows 7, 8, 8.1, 10 (32 and 64-bit); Mac OS 8/9 , OS-X; Linux 2.4 and greater