USB to TTL Serial Adapter USB to Serial Converter for Development Projects Featuring Genuine FTDI USB UART IC ¡FT232BL¡¯ Chip Compatible with Windows 10

It works great for programming microcontrollers such as the arduino, boarduino, Bareduino, Raspberry Pi, ESP8266, micro minimOSD, and Atmel Xmega Xplained, Atmega328 mini pro, or any other that can be programmed over serial After installing the driver,This FTDI TTL adapter will simulate a COM port on your computer/laptop. Through this simulated COM port, you can communicate or program with various hardware or MCUs, such as: arduino board, Raspberry Pi, ESP8266, router and so on. Instructions for use??Example MCU? GND: Connect to GND RXD: Connect to MCU.TX (Signal Flow: MCU.TX >> FT232 >> PC.RX) TXD: Connect to MCU.RX (Signal Flow: MCU.RX << FT232 << PC.TX) 3V3/5V: Output 3.3V or 5V (module powered by USB, jumper cap :to 3.3V or 5V) RTS: Connect to MCU.CTS (Signal Flow Direction: MCU.CTS << FT232 << PC.RTS) CTS: Connect to MCU.RTS (Signal Flow: MCU.RTS >> FT232 >> PC.CTS) Specification: Main chip: FTDI FT232BL Pin Definition: CTS,RTS,RXD,TXD,GND,VCC Output VCC: 3.3V or 5V USB interface: 2.0 With 500MA self-recovery fuse reversed does protection The maximum speed: 921600bps List of supported systems 1,Windows xp,7,8,10 2,Ubuntu 11.10, kernel 3.0.0-19 3,Mac OS X 10.3 to 10.8 (32 &64 bit) 4,Mac OS X 10.9 and above(64 bit) You can download the driver directly from FTDI's website http://www.ftdichip.com/Drivers/VCP.htm Packing list: 1 X FTDI USB to TTL Adapter 1 X 5PIN DuPont cable Installation Guides If you need further support about how to pick up and install drivers, please goes to http://www.ftdichip.com/Support/Documents/InstallGuides.htm