USB 3.0 to Dual-Bay SATA with 2 port USB 3.0 Hub combo with offline clone function offer you a perfect solution for extrabook with limited USB ports and capacity.
It can expand two USB 3.0 port for extra devices,such as keyboard/mouse. Meanwhile,it has dual SATA III port for 2.5&3.5'' HDD/SSD, can read 2 hard disks at the same time, and can realize one-button offline copying and data backup more convenient. Specifications:
?Support USB transfer rate up to 5 Gbps. ?Supports use 2 hard drives simultaneously. ?Support hard disk one-button offline copy. ?Support UASP acceleration. ?Support 2.5 &3.5 inch SSD hard drive ?Support for Windows 7/8/10/XP/Mac OS/Linux ?Two USB3.0 HUB ports, backward compatible with USB2.0/1.1 ?Support for large capacity hard drives up to 12TB. ?USB Dual SATA Adapter Cable Combo, More Sharing Fun USB 3.0 to SATA Hard Drive Converter allows you to connect two standard 2.5" or 3.5" SATA hard drive to computer. 1. No extra power required for 2.5" HDD/SDD. 2.For 3.5" HDD/SDD, need to 12V/2A power adapter 3.When reading two hard disks,need to connect 12V power supply ?Copy mode: 1.Connect the hard disk to two SATA interface (SATA A is the source hard disk and SATA B is the target hard disk) 2.Connect to the 12V power adapter,no need to connect the computer 3.After inserting the AB hard disk, press the "Clone"button until the 4 lamps are on. At this time, 25% is shining, 50%,75%, 100% is not bright. After the copy is 100%, When the light is off, the clone operation is completed. 4.After the copy is completed, the target disk needs to be found in the computer/management/disk management Tip: 1.A disk capacity must be less than or equal to the B disk capacity
It can expand two USB 3.0 port for extra devices,such as keyboard/mouse. Meanwhile,it has dual SATA III port for 2.5&3.5'' HDD/SSD, can read 2 hard disks at the same time, and can realize one-button offline copying and data backup more convenient. Specifications:
?Support USB transfer rate up to 5 Gbps. ?Supports use 2 hard drives simultaneously. ?Support hard disk one-button offline copy. ?Support UASP acceleration. ?Support 2.5 &3.5 inch SSD hard drive ?Support for Windows 7/8/10/XP/Mac OS/Linux ?Two USB3.0 HUB ports, backward compatible with USB2.0/1.1 ?Support for large capacity hard drives up to 12TB. ?USB Dual SATA Adapter Cable Combo, More Sharing Fun USB 3.0 to SATA Hard Drive Converter allows you to connect two standard 2.5" or 3.5" SATA hard drive to computer. 1. No extra power required for 2.5" HDD/SDD. 2.For 3.5" HDD/SDD, need to 12V/2A power adapter 3.When reading two hard disks,need to connect 12V power supply ?Copy mode: 1.Connect the hard disk to two SATA interface (SATA A is the source hard disk and SATA B is the target hard disk) 2.Connect to the 12V power adapter,no need to connect the computer 3.After inserting the AB hard disk, press the "Clone"button until the 4 lamps are on. At this time, 25% is shining, 50%,75%, 100% is not bright. After the copy is 100%, When the light is off, the clone operation is completed. 4.After the copy is completed, the target disk needs to be found in the computer/management/disk management Tip: 1.A disk capacity must be less than or equal to the B disk capacity
