Urethane Band Saw Tires 12 inch x 7/8 inch x .095 inch 2 Pack for Craftsman Band Saws Phoenix goods

?Don't be fooled, The genuine product is only "Phoenix goods", our company has not authorized any other company to sell this product! Products sold by other merchants through this link are counterfeit, We will take legal action! Please look for "Sold by Phoenix goods" before adding to cart. Phoenix goods Urethane Bandsaw Tires 12? x 7/8? x .095?, 2 pack How to install First, After disassembling old "tires", clean up the gummy debris left on the wheels. Mounting: Used a clamp to hold the tire on the wheel in one spot, and then used a screwdriver to pry the rest of the tire on. This made installation relatively easy Uniform stretch: After mounting, removed the clamp and pushed the shaft of the screwdriver completely under the tire, so it was between the tire and rim. Then ran the screwdriver around the wheel several times to make sure the tire was uniformly stretched around the wheel. Seating the tire: Next, made sure the tires were properly seated in the groove on the wheels, rolled the wheel on a concrete floor, pushing down pretty hard with your hands, so the concrete would forced the tire into the groove. After mounting, reinstalled the wheels and readjusted everything, finish! ?Urethane band saw tires no adhesive needed, but need to be stretched on. If your new band saw tire is too tight to fit onto the wheel, submerged the new tire under hot water for a few minutes, this will make things easier.