Pay Attention:
1.When installing, directly screw the end of the hose without the joint of the hand pump to the interface of the filter !!
2.The filter element needs to be completely saturated before the filter is used to produce clean water anywhere.
Advantages:
The length of our product hose is longer, which can effectively avoid the situation that the product use scene is limited due to the length of the product hose. There may be some sinks that are too deep but the hose is too short, which will be very inconvenient during operation. Convenience, and our product hose lengths allow you to use it with confidence in any scene you want.
Action Principle:
By pressing a hand pump to create a simple pressure gradient, water is filtered through a water-placed filter into a hose and out the other end of the hose.
Best Choice:
Fully perfused filter without faucet or water pressure. This primer tool can be simply used to saturate the filter manually, a good alternative to starting the filter. Some faucets are too large in diameter or sinks are too shallow for filters. And this hand pump is the solution to start the filter!
How to Clean and Store:
The filter element can be backwashed by reversing the hose direction of the hand pump, or by using a properly diluted natural cleaning product or mild soap and warm water. Components should be thoroughly rinsed and air dried before storing them in a cool, dark and dry place. Avoid direct sunlight, as ultraviolet rays can damage the product.
Highly Cost Effective:
Good quality products, strong sealing, can generate pressure at the same time increase the conversion rate, easier to draw water from one end of the filter and effortless.
