Universal Remote Control DC 24V 1CH 433 rf Wireless Relay Remote Control Receiver and Transmitter for Garage and Light Switch

Working voltage : DC 12V Input vlotage : 1~250V Output vlotage : 1~250V Quiescent Current : 5MA Max current : 10A Max load: 2200W RF frequency : 433MHz Pin : NO / COM / NC Working temperature : -30~+80 Receiving Sensitivity : 97dbm Amount of storage remote controls : 25 pieces Support encoding : 1527 Leaning code /2262 fixed code RF Operating mode : ASK superheterodyne wireless reception Receiving range : Open space is more than 50 meters Remote operating mode : Momentary Mode / Toggle Mode / Latched Mode / Delay Mode - 1. Momentary Mode: Description : Press and hold on button "A" , relay will turn on; Release the button, this relay will turn off. Program : 1. Press the learning button(on the Receiver) once. Wait for 3 seconds; 2. Press one button on the remote control. Wait for 3 seconds. Succeed. - 2. Toggle Mode: Description : Press button "A", relay will turn on; Press button "A" again, this relay will turn off. Program : 1. Press the learning button(on the Receiver) twice. Wait for 3 seconds; 2. Press one button on the remote control. Wait for 3 seconds. Succeed. - 3. Latched mode: Description : Press button "A", relay will turn on; Press button "B", this relay will turn off. Program : 1. Press the learning button(on the Receiver) triple. Wait for 3 seconds; 2. Press button "A" on the remote control. Wait for 3 seconds.