Looking for a Cat6 RJ45 plug that is:
- Hassle-Free
- Well documented
- ANSI/TIA 568 Certified
- ...tested with real cables in the real world by real installers
Look no further, as you just found your plug!
Our Cat6 RJ45 plugs are to be used with unshielded (U/UTP) Ethernet cables, both stranded and solid conductors. The pass through design is where your frustration level will come down and success rate will increase. If youve ever dealt with the old style push-in or push-in with load bar plugs, then you know what we mean.
After stripping the cable jacket off and combing out the individual conductors, simply line up the conductors into the correct T568A or T568B color sequence and push them through the nose of the connector. Everything look good? If the wiring sequence is still correct, now pull. Use the push-pull method to help eliminate kinking of the conductors inside the plug and get the cable jacket up as far as possible into the rear of the connector. Using our Heavy Duty Pass Through Crimp and Termination Tool, crimp and terminate the plug onto your cable. The conductors are shaved off, and the plug is ready to go. Onto the next one!
If you have a crimp and termination tool that doesnt shave off the conductors automatically, no big deal. Simply terminate the plug as you usually do and then flush cut the excess from the nose of the plug. Double check to make sure you dont leave any conductors protruding. Our 5 Flush Cutters are ideal for this application.
Compatible with 23AWG unshielded Ethernet cables with cable jacket diameters ranging from ?5.90 - 7.10mm and conductor insulation diameters from ?0.95 - 1.05mm. Backwards compatible with Cat5e if your cable meets these dimensions.
This plug has been thoroughly tested and verified with our trueCABLE Cat6 U/UTP Ethernet cables.
