Trim Puller Tool for Baseboard, Trim Removal Tool and Baseboard Removal Tool, Trim Puller Tool for Baseboard & Molding Removal Tool, Flooring Tools for Removing Baseboard, Molding and Decorative Panel

Steps for Usage: Step 1: Use a utility knife or painter's 5-in-1 tool to score the top of the seam where the trim is in contact with the wall. This will prevent the paint from tearing off the wall. Step 2: Lean the front of the trim puller against the wall, with the sharp edge at the seam where the trim meets the wall. For best results, start at the end of baseboard strip. Step 3: Strike the top of the Trim Puller with a hammer or hard mallet, driving the Trim Puller between the trim and the wall. The wedge will start to automatically separate the decorative strip from the wall. Step 4: Once the Trim Puller is wedged between the trim and wall, gently pry the trim away from the wall in a twisting motion creating a gap of approximately 4 to 8 inches. Repeat steps 2-4, moving the Trim Puller along the wall in 12 inch increments or as needed. The gap will increase with each pull until removed.