Torch Lighter, Cigar Lighter, Cigar Cutter and Lighter Set - Triple Jet Flame Butane Cigarette Torch Lighter with Cigar Punch Cutter

Note!Note!Note! Please pay attention to this instruction before using lighter. *Gas Refuelling Please use colton or atomic lighter refill.Insert the stem of the gas refueling container vertically into the tank valve located on the bottom of the lighter.Press the container firmlydown for about 3 seconds.Repeat 3-4 times for maximum refueling. *Using The Special Gas for Lighter If you use the bad quality gas, if will influence the quality of the lighter. *Waring for Gas Refuelling 1.When refuelling ensure that there is no open flame nearby. 2.Don't ignite when refuelling 3.When refuelling, please turn the screw to the "-" position. 4.After refuelling, please turn the screw to the way of "+",adjust the flame at 2-3cm height. *Flame Adjustment 1.Please use the suitable screw driver to turn the adjusting screw in the lighter base.when adjusting the flame:highter flame,please turn left "+" of the screw;lower flame, please turn right "-" way of the screw. 2.Please adjust the flame as the suitable height in order to avoid danger. 3.The best height of flame: Windproof lighter: 1.5-2.0cm; Jet flame lighter: 2.0-2.5cm; Piezo lighter:2.5-3.0cm *Warning 1.Keep away from children. 2.Ignite lighter away from face and clothing. 3.Contains flammable gas under pressure. 4.Never expose to heat above 45¡æ or to prolonged sunlight. Cigar Size:Our cigar lighters are suitable for the cigar: diameter about 15mm(0.59 inch) or perimeter about 44mm(1.73 inch); not suitable for much bigger cigar; Cigar Torch Will Be Shipped WITHOUT Butane to comply with DOT and USPS Safety Regulations