Toilet Plunger, JAZORR High Pressure Air Drain Blaster Plunger, Drain Plumb Plunger,Drain Clog Remover with 4 Replaceable Heads for Bathroom, Kitchen, Bathtub, Toilet, Floor Drain (White?

Have You Ever Experienced Any of The Following Helplessness? Tried all kinds of tools, but still can't unclog the pipe and have to hire expensive plumbers? Children often throw toys, large paper balls, and lint into the toilet causing clogs? Are the pipes in your house often clogged? Do you have a clogged pipe that fills your house with bad odors? No need to call an expensive plumber in the middle of the night, now you can solve clogging problems with JAZORR drain plugs! How to Use The Toilet Plunger. Step 1. Install the white sealing ring and piston. Step 2. Install and tighten the two-part host. Step 4. Start inflating. Step 5. Unscrew the nut. Step 6. Put the nut & rubber head on the host and screw it down. Step 7. Put it same toward the drain to prevent water from splashing. Step 8. Press the switch? it's working. Precautions Before Use. Please observe the following precautions when using: 1. When the toilet is dredged, pay attention to the closure with the wall of the toilet, and tilt 45 degrees when using. 2. Don't fasten the jet to the mouth, nose, ears and eyes. 3. When using minors, parents should take care of their. 4. If the pipeline is semi-blocked, it is suggested to put some toilet paper sundries. Make the pipeline close to full blockage, so that the effect of using the product is better. 5. The blocking nozzle must be immersed in the blocked fluid medium to work so that the effect will be obvious. 6. When used, more water is released, which is not easy to leak out. When using this product for the first time, it is recommended to cover it with other articles to avoid splashing on yourself. After skilled use, there is no need for occlusion and no splash. 7. Continuous use should not exceed 5 times, in order to avoid excessive temperature and damage to the machine. Let it dry for more than 30 minutes before use. 8.If the plungers for the bathroom can not hold the pressure or the barometer does not change while inflating, Check if the sealing ring fits tightly into the slot. Before use, please read the following safety instructions carefully.