Features:
1. A good quality pre-wired control panel assembly for a telecaster type guitar
2. The panel is 160 x 32mm and is fitted with a three way pickup seletor switch, volume and tone controls with metal knobs
3. The 3 position switch allow switching between neck pickup, bridge pickup or both. The suggested switch wiring is shown in the diagram below
4. The circuit consists of a 250kOhm type B volume control pot and a 250kOhm type A tone control pot which uses a 47nF capacitor to ground
The following connections are required:
- Connect the neck pickup core to switch pins 1 and 2
- Connect the bridge pickup core to switch pins 6 and 7
- Connect the flying lead core and screen to the jack socket
- Connect the bridge and neck pickup screens to the potentiomete cases (ground)
Pakcage Included:1 x Guitar Panel Direct Control Plate
Timiy Tele Guitar Panel Direct Control Plate 3 Way Loaded Switch Wiring Harness Knobs Chrome
Was:
$55.96
Now:
$27.98
- SKU:
- q87975
- UPC:
- 665268094163
- Condition:
- New
- Availability:
- Free Shipping from the USA. Estimated 2-4 days delivery.