Timer Relay Module Time Delay Relay DC 5-30V Delay Controller Board Delay On/Off Cycle Timer 0.1s-999minsTrigger Delay Switching Relay Module with LCD Display

Specifications: Supply voltage: DC 6-30V, support micro USB 5.0v power supply Trigger signal: High level (3.0V-24V) Output capacity: DC 30V /5A, AC 220V / 5A Static current: 20mA Operating current: 50mA Life: & gt; 100,000 times Working temperature: -40 ~ 85 ? Size: 6.2 * 3.8 *1.7cm / 2.44 * 1.5 * 0.67om Weight: about 27g 1.How to set the timing range: After setting the parameter value in the mode selection interface, press the “STOP” button briefly to set the timing range. XXX.-Timing range: 1 to 999 seconds. XX.X-timing range: 0.1 to 99.9 seconds X. X. X.-timing range: 1 to 999 minutes. 2.Parameter description: "OP"-On time, "CL"-Off time, "LOP"-Cycle time (1 to 999 times, "---" means an infinite loop). These parameters are independent of each other, but are shared by each mode. On the main interface (display 000), press [SET] briefly to display [OP] ([CL], [LOP]) and the corresponding time XXX.If the mode (mode P1.1, P1.2, P1.3, etc.) has only “OP” time, press the “SET” key briefly to display only the time corresponding to “OP”. Some models (modes P3.1, P3.2, etc.) have parameters "OP", "CL", and "LOP". Pressing the "SET" button briefly will correspond to "OP"Time, corresponding time with “CL”, “LOP” and corresponding number of times. Package list: 1 * Timer relay module