Time Delay Module LED Display Digital Timer Relay PLC Automation Control Switch Module-12V-

Features: Power on, start delay, time is up, relay suction (work), power off disconnect. Switch on the power supply, relay snap-in (snap-in), start delay, time is up, relay disconnect. Switch on the power supply, start delay, time is up, relay suction (work), suction one period of time automatically disconnect. Switch on the power supply, relay suction (working) X seconds, disconnect Y seconds, infinite cycle. Switch on the power supply, relay suction (working) X seconds, disconnect Y seconds, finite cycle (set times). Signal trigger, relay suction, time to disconnect the relay, again in the delay period trigger invalid. Signal trigger, relay suction, time to disconnect the relay, in the delay period again triggered to retime. Signal trigger, relay suction, time to disconnect the relay, disconnect again in X seconds after the trigger is invalid. Signal trigger, relay snap-in, signal disappear, start timing, time to the relay disconnect, signal timing cancel during the delay, the relay remains snap-in. After N times of detection, the relay does not close until the power is cut off. The detection signal lasts for more than X seconds before the relay is sucked in and disconnected in Y seconds. The signal disappears and the time is cleared in less than X seconds. Specification: Material: Plastic Weight: 28g/1oz Voltage: 5V, 12V (Optional) Current: Approx.12ma (standby); Approx. 50ma (when the relay is in operation) Load: less than 250V 10A  AC / less than 30V 10A DC Size: 63.6*33.1mm/2.5*1.3inch Package List: 1 x Timer Relay