The perseids 7 inch HDMI Touch Screen 1024x600 TFT LCD Display High Resolution Monitor for Raspberry Pi 4 Model B 3 B A BB BlackBanana Pi Support Raspbian Ubuntu Win 7810

This 7 inch HDMI LCD supports various systems like Raspberry Pi, Banana Pi, Banana Pro, BB Black to provide Lubuntu, Raspbian with and Angstrom images with high resolution of 1024×600 and Resistive Touch Screen.

Basic: ·1064*600 HD resolution ·capacitive touch ·Support back light control ·Support raspberry pi provide driver under Raspbian system ·Support Ubuntu mirror image ·Support Banana pi,Banana Pro,provide Lubuntu,Raspbian mirror image ·Support BB Black,provide Angstrom mirror image ·Common use HDMI display

Specifications: Display size: 7 inch Touch screen: Support Dimensions: 165 (W) × 100 (H) × 5 (D) mm Resolution: 1024 × 3 (RGB) ×600 Panel type: TFT Contrast ratio: 500: 1 Backlight: LED Operating voltage: 5V (current requirement 1A-2A) Rated power: 6-7W Signal input: AV + VGA + HDMI (HDMI 1.2)

FAQ Why the LCD doesn't work with my Raspbian? To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual. However, for the first testing, you may want to use our provided image directly.

Why the LCD still doesn't work with the Waveshare provided image? Make sure the hardware connection is correct and connects fine. Make sure the image in TF card is burnt correctly. The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.

Which power supply should I use? It is strongly recommended to use a stand-alone 5V/2A power adapter, because the PC's USB port might doesn't have enough power to support the Pi and LCD.

Package Includes: 7inch HDMI LCD x 1 HDMI connector x 1 Touch pen x 1 RPi screws pack (4pcs) x 1