The Last Coat Iron Off- Heavy Duty Fallout Iron Remover and Wheel Cleaner Treatment-32 oz- Rust and Brake Dust Dissolver- Professional Grade Removal Spray Detailing Car Cleaner-Use For Decontamination

DIRECTIONS FOR GETTING PROFESSIONAL RESULTS: As with all of our products, Iron Off is super-simple to use.  Directions for Using Iron Off: ***Do not work in direct sunlight. Only work on a surface when it is cool to the touch*** 1. First off know that Iron Off has a strong smell, so make sure to use it in a well-ventilated area. Then, shake the bottle very well then spray directly on to the surface. (Only do so in the shade when the wheel surface is cool to the touch). Spray directly on them when dirty. Pre-rinsing may dilute Iron Off when you spray it on the surface. 2. Let Iron Off dwell on the surface for 2-5 minutes. As Iron Off goes to work on ferrous brake dust and contaminants, it will turn a purple/red color as it breaks down the iron to a water-soluble state for easy removal (do NOT let Iron Off dry on the wheels/surface). 3. Rinse Clean with high-pressure water to remove all of Iron Off. 4. If wheels were extremely contaminated with brake dust to start, a follow-up hand wash with soap and water on the wheels is recommended to remove any leftover Iron Off. 5. Optional but recommended. Apply The Last Coat or Black Ice to protect. Finish off with a layer of AMP if desired. If you had our coatings applied before using Iron Off, then you will definitely want to reapply to the treated areas as the coatings will degrade slightly. ** It is recommended to spot test first before full application and use. Safety Information: Avoid inhalation. Use adequate ventilation. Iron Off has a strong smell, you want to use it in a well-ventilated area. May be harmful if swallowed. May cause skin burns and eye damage. Make sure to wear protective equipment where needed. We recommend gloves. KEEP OUT OF REACH OF CHILDREN