TFM 24 GPD RO Reverse Osmosis GE Membrane Compatible FX12M w/ Pre & Post Filters

This GE Standard Size Reverse Osmosis Membrane TFM-24 fits in a standard membrane housing. The same standard membrane can accommodate RO membranes with capacities ranging between 18-100 gallons per day (GPD). Average NaCl Rejection: 98% Permeate Flow @ 65 PSI 24 GPD Specifications are based on 500 mg/L NaCl solution at 65 psi net pressure (4.1 bar), 77°F (25°C), 15% recovery after 24 hours. Individual element flux may vary ± 15%. If you would like to change your membrane to a capacity other than what was originally in your Reverse Osmosis System, you must change the drain flow control also. The membrane and drain flow restrictor are sized to go together. ---Pre filter Class 1 Chlorine, Taste & Odor Reduction Made with Premium Quality Coconut Shell Activated Carbon 5 Micron Filtration No Release of Carbon Fines Fits all Standard 10' Filter Housings, Reverse Osmosis Systems (including all H2O Filter Warehouse, Watts, Pentek & Hydrotech) and Under Sink Systems 5,000 Gallon capacity @ 1 PPM Chlorine with 98% chlorine removal at end of cartridge life. Flow rate: 1 GPM Cartridge is designed for use in Under Sink Filtration & Reverse Osmosis Applications, but not for whole house applications. NSF Certified under manufacturer's part # CBC-1010AAC. ---Post filter Class 1 Chlorine, Taste & Odor Reduction Made with Premium Quality Coconut Shell Activated Carbon 1 Micron Filtration No Release of Carbon Fines Fits all Standard 10' Filter Housings, Reverse Osmosis Systems (including all H2O Filter Warehouse, Watts, Pentek & Hydrotech) and Under Sink Systems 5,000 Gallon capacity @ 1 PPM Chlorine with 98% chlorine removal at end of cartridge life. Flow rate: 1 GPM Cartridge is designed for use in Under Sink Filtration & Reverse Osmosis Applications, but not for whole house applications. NSF Certified under manufacturer's part # CBC-1010AAC.