Specification:
Condition: 100% Brand New
Item Type: Tesla Coil
Material: Brass Coil +PCB Board + Aluminum
Color: As Pictures Shown
Material: Brass Coil +PCB Board + Aluminum
Voltage: AC110-240V
Plug: US Plug
Power Supply Input Voltage: 24V DC
Power Supply Current: 2A-3A
Power Supply Interface: 5.5-2.1 Internal Positive and External Negative
Audio Interface: 3.5 Audio Port
Secondary Coil Size: Diameter 4cm / 1.57in , Height About 10cm / 3.9in
Number of Coil Turns: 370 Turns, Enameled Wire with Coil Diameter 0.2
Steps:
Step 1: Check all equipment;
Step 2: Install the secondary coil. Secure with the attached screws;
Step 3: Install the discharge pin and fix it with the attached screws;
Step 4: Connect the audio cable;
Step 5: Turn on the power;
Step 6: Play music;
Step 7: Pass the LED test;
Step 8: Turn off the power and replace the discharge needle.
Attention! Do not touch the discharge needle!
Please note that when powering on, turn on the 220V to 24V switching power supply first, and after a delay of 1-2 seconds, wait for the power supply voltage to stabilize before turning on the Tesla power switch. When the power is off, first turn off the Tesla switch, and then turn off the 220V to 24V switching power supply.
Package List:
1 x Tesla Coil
1 x Power Supply
1 x Audio Line
1 x Ion Windmill
1 x Ion Garland
1 x Copper Needle
1 x Coil
3 x Lights
1 x Wound Secondary Coil
Note:
1. As the color of the monitor is different, the color may be slightly different from the actual product.
Condition: 100% Brand New
Item Type: Tesla Coil
Material: Brass Coil +PCB Board + Aluminum
Color: As Pictures Shown
Material: Brass Coil +PCB Board + Aluminum
Voltage: AC110-240V
Plug: US Plug
Power Supply Input Voltage: 24V DC
Power Supply Current: 2A-3A
Power Supply Interface: 5.5-2.1 Internal Positive and External Negative
Audio Interface: 3.5 Audio Port
Secondary Coil Size: Diameter 4cm / 1.57in , Height About 10cm / 3.9in
Number of Coil Turns: 370 Turns, Enameled Wire with Coil Diameter 0.2
Steps:
Step 1: Check all equipment;
Step 2: Install the secondary coil. Secure with the attached screws;
Step 3: Install the discharge pin and fix it with the attached screws;
Step 4: Connect the audio cable;
Step 5: Turn on the power;
Step 6: Play music;
Step 7: Pass the LED test;
Step 8: Turn off the power and replace the discharge needle.
Attention! Do not touch the discharge needle!
Please note that when powering on, turn on the 220V to 24V switching power supply first, and after a delay of 1-2 seconds, wait for the power supply voltage to stabilize before turning on the Tesla power switch. When the power is off, first turn off the Tesla switch, and then turn off the 220V to 24V switching power supply.
Package List:
1 x Tesla Coil
1 x Power Supply
1 x Audio Line
1 x Ion Windmill
1 x Ion Garland
1 x Copper Needle
1 x Coil
3 x Lights
1 x Wound Secondary Coil
Note:
1. As the color of the monitor is different, the color may be slightly different from the actual product.
