Tenergy Smart Charger for 8.4V-9.6V NiMH Battery Packs w/Mini Tamiya Connector + Standard Tamiya Adapter

Use it for any 8.4v-9.6v NiMH Battery Packs that are used in RC Cars/Airplanes. Just make sure connector is Standard or Mini Tamiya! Features *Smart Charger for NiMH battery packs of 8.4V-9.6V (7-8 cells). *Recommended battery packs with capacity of 600-2000mAh. *Able to auto distinguish bad battery and indicate malfunction. *Able to activate over-discharged cells. *Current ram-up way benefits cell capacity and life cycle. *Automatically stop when battery pack is fully charged by Delta Peak detection. *Short circuit & reverse polarity protections. *Built in mini male tamiya connector. Includes *Smart AC Charger for 8.4-9.6V NiMH Battery Pack *Instruction Manual *Mini Tamiya to Standard Tamiya Adapter Specifications Rating Input Voltage: 100~240V AC 50/60Hz Rating input current: 2Amp Input power: <11W Output voltage Rating: 8.4V/9.6V VDC Output voltage range: 7V DC~12DC Charge Current: 600+_60mA Trickle Current: 200+_20mA Max Output Power: 7.3W Operating Temperature: -10~30*C (UL Certification) Charging Temperature: <60?C Storage Temperature: -30~85*C Maximal -Delta V: 5mV/cell Cell Voltage: <1.56V/cell Operating Humidity: <90% *Don't use the charger for low capacity (under 600mAh), high capacity (over 2000mAh) or non-rechargeable battery packs. There is a timer cutoff of 5 hours; battery packs over 2000mah may not fully charge. WARNING - DO NOT CHARGE LiPO Batteries -DO NOT CHARGE: if the label on your battery says: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium. -Caution: LiPO battery packs may often have two sets of leads/connectors - do not charge if identified as LiPO battery. *Failure to follow these warnings may result in fire or personal injury. *Contact our customer support team if you are unsure if your battery can be charged.