Tenergy RC Battery Charger for NiMH/NiCd 7.2V-12V 6S-10S Battery Packs Smart Charger for RC Cars RC Airplanes Airsoft Batteries Compatible with Standard Tamiya/Mini Tamiya/Alligator Clip Connector

Accessories Included 1 standard Tamiya connector. 1 connector adapter from Standard to Mini Tamiya. 1 set of alligator clip adapter with standard Tamiya connector on one end. 1 Temperature sensor Specification Input: AC100-240V Output: 7.2-12V 0.9or1.8A Operation Instruction Connect battery pack to output connector and plug AC power source Make sure battery polarity is connected correctly (Red wire is positive) Charger will detect battery voltage automatically, Red LED will be on during charging When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery Battery pack capacity should be 900mAh or higher Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging The charger should be positioned horizontally and in well ventilated condition, avoid water and keep away from flammable/explosive goods Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't leave the batteries and chargers on wood surface/carpet Cut off the power supply before connect/disconnect the charger with batteries Don't disassemble the charger, High voltage inside! WARNING - DO NOT CHARGE LiPO BATTERIES -DO NOT CHARGE: if the label on your battery says: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium -Caution: LiPO battery packs may often have two sets of leads/connectors - do not charge if identified as LiPO battery **Failure to follow these warnings may result in fire or personal injury Contact our customer support team if you are unsure if your battery can be charged