Temperature Controller bayite BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V - 240V 10A

The BTC201 temperature controller can turn on/off an electric appliances at desired temp. For example, you can use the controller to turn on/off a heater and a fridge to keep temp around 100 F. Turn on heater at 98.5 F. Turn on fridge at 105 F. Turn off the heater/fridge when temp reaches 100 F. The setting is (SV=100, Cd=5, Hd=1.5). the controller itself doesn't change temp. Main features: 1-YEAR Warranty Plug and play. Maximum load: 1100W @110V or 2200W @220V(Not compatible with the 2 hot line 220V plug). On/Off Control, Heating and Cooling Celsius or fahrenheit read-out. Temperature calibration. Compressor delay protection time setting. High and low temperature alarms are available(You can use this feature to alarm you when the temperature overshoots your desired temperature) Specification: 1.Power supply: AC 110V 50/60Hz 2.Measure range: -58°F ~ 230°F / -50°C ~ 110°C 3.Temperature resolution: 0.1 4.Accuracy: ±0.5 5.Working mode: Heating and Cooling mode 6.Max span between turn-on degree and turn-off degree is 25 7.Control resolution: 0.1 8.Power consumption: less than 3W 9.Relay contact capacity: 10A 10.Store setting after power off: YES 11.Compressor delay protection: YES 12.High and Low Temperature alarm: Yes 13.Product size: 4.9x4.5x1.9 inch (12.5x11.5x5 cm) 14.Sensor Cable length: 3m(9.8ft) Advanced function: 1.Switch temperature unit(Default: F): F or C 2.Switch resolution(Default:0.1): 0.1 or 1 Package Content: 1x BTC201 Temperature controller 1x sensor cable 1m/3.3ft power cord