Teak Golden Composite Wood Veneer 12" x 12" with Paper Backer 1/40" Thick # 720

Golden Teak composite wood veneer sheet 12" x 12" with paper backer 1' x 1' x 1/40" thickness. Pictures are accurate representation of this product. Composite wood veneer has been dyed and cut to produce a consistent, clean, defect free attractive design. Otherwise, like any other wood veneer. Some photos may show other sizes, accessory products, customer projects and wet or finished veneer. This product is unfinished. Ships flat in between thick cardboard with application instructions. Other sizes, backers and raw veneer are available. Faster usually available. Product code # 720. Trust the knowledge, experience, and reputation that has served the wood industry since 1995. About pictures : Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness : (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut : generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply : Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish : most any conventional finishing pr