TAYOKI 6pc Resin Wine Holder Molds KitDIY Rack Tray Holder Resin Casting Molds plus Coaster Silicone Resin Molds Resin Wine Holder Molds Silicone Tray Coaster Molds Epoxy Resin Casting Wine Rack Mold

Material: Resin Casting Molds are made of silicone,flexible and soft. Size of the Wine Holder Molds: 255*105mm/10.03*4.13inch Depth of the mold: 1cm/0.39inch Diameter of the middle hole: 32mm/1.25inch Diameter of the both sides hole: 14mm/0.55inch Mold Weight: 68g/0.15lb Size of the Silicone Coaster Molds: Diameter is 13cm/5.11 inch Wide application: Silicone resin molds for Wine Holder making is good choice for DIY handicrafts,you can making coaster and holder with family member, children ,friends,schoolmate or colleague. How to make: 1.To pour the resin into the silicone molds at first 2.Adding glitter or pigment into it if you need 3.Mix them well and wait it dry out during 24 hours de-mould How to storage: Please clean the resin molds and storage the silicone casting molds away from the direct sunlight and dust. How to de-mould: You can use a mold release spray or a drop of soap mix with a bit of water as a release agent Package includes: 1 x Wine Holder resin molds 2 x Coaster Resin Molds Warm Tips: --Please make sure your resin piece is fully cured when you decide to demould. --If any question,please contact to us at first