TaoTronics Bluetooth Transmitter and Receiver, Digital Optical TOSLINK and 3.5mm Wireless Audio Adapter for TV/Home Stereo System - aptX Low Latency (Renewed)

Connect to TV via Digital Optical Audio Out 1. Find the Digital Optical Audio Out jack on your TV. 2. Connect the transmitter TT-BA09 to your TV via the Digital Optical Audio Out jack using the digital optical cable. 3. Pair the transmitter TT-BA09 with your Bluetooth Headphones/Speakers. Connect to TV via AUX / RCA Audio Out Once the transmitter is connected to Bluetooth stereos, the blue LED indicator will remain on. If there's no sound coming out from your stereos, please kindly have a check see if you have plugged the unit into the Audio Output jack on your TV Pair with two Bluetooth headphones / speakers simultaneously 1. Turn on your speaker/headphones A and the transmitter, place them into pairing mode (tap the power button twice to set the transmitter into pairing mode, LED flashes blue and red). Make sure they pair with each other successfully. 2. Turn off the Bluetooth of the speaker/headphones A and turn on speaker/headphones B. Then tap the Power Button twice of the transmitter to pair and connect to your speaker/headphones B. Also make sure they pair with each other successfully. 3. Turn on the Bluetooth of speaker/headphones A. In approximately 30 seconds, it will automatically connect in. And now the audio will be transmitted to both speakers/headphones. Note 1. If the transmitter could not pair with the headphones/speakers successfully, please kindly reset both the transmitter and the headphones/speaker. 2. The transmitter is supported to aptX Low Latency codec, aptX Low Latency supported headphones/speakers are also required for the audio to be encoded via this codec. What is in the Box: 1 x TaoTronics Bluetooth 5.0 2-in-1 Adapter (Model: TT-BA09) 1 x 3ft Digital Optical TOSLINK Cable / 50cm Audio Cable 1 x 3.5mm 1.64ft / 50cm Audio Cable 1 x 3.5mm Female to 2 RCA Male Cable 1 x USB Charging Cable