TANGSPOWER 25.2V Charger 63W 24V 25.9V Output 29.4V DC 5.5 x 2.1 x 11mm Port for 7S Lithum Battery Pack

Input: 100-240V AC 50-60HZ Protections: Short circuit / Overload / Over voltage Plug: US LED Display: Red: In charging state, Green: Full Charged Charge mode: CC to CV Use: lithium battery pack charger Use and maintenance of the charger : 1. When charging, first connector to the battery, then connect to AC; after full, cut off AC, then pull the battery plug. If you pull the battery plug first while charging, especially when the charging current is large (red light), it is very easy to damage the charger. 2. When the LED light turns green, please continue charging for 2-3 hours. 3. Please do not run out of battery power, then charger. Otherwise the battery cannot be protected or even damaged. 4. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-called re-lighting, which is conducive to the activation of long-term immobile material in the deep part of the battery. Luminous means that riding the controller battery undervoltage protection action. 5. If your battery has not been used for a long time (2-3 months), please charge the battery before using it. Make sure your battery is not broken. 6.Please use the charger in a dry place in time. 7.When you do not use the charger, do not always connect the power supply. 8.Please confirm your battery, Because it is used to charge the lithium battery. Do not use the charger on the LiFepo4 battery, otherwise the charger will be got incredibly hot. Tangspower has always devoted itself to providing products with excellent quality for the end-users. If you are not satisfied with our product, let us know and you will be offered a full refund or replacement.