TamperSeals Group - 100pcs 25x60mm Blue Non-Transfer Tamper Evident Security Void Stickers/Labels/Seals with A Barcode for Reusable Package or Expensive Surface

These non-transfer security void stickers provide both security and the added convenience to avoid leaving (or cleaning up) a sticky adhesive residue. Applications: include automobile doors, appliance, electronic devices, voting machines, hard drives, pharmaceutical packaging, aircraft seals, gift certificates, PDA , safes, phone seals, cabinets, exhibitions, envelopes, documents, etc. and any application where residue is an issue. Before applying the stickers it is necessary: Shipping: Labels must not be exposed to temperatures over 100°F (37°?) during shipment or storage. Temperatures over 100°F can damage the labels and shorten the shelf life. Recommended Application: 1.If needed, clean the application surface with 90% Isopropyl Alcohol prior to affixing the label. 2.Apply security label to the clean & dry surface at or above the recommended application temperature. Notes: On the recommended surfaces at 70°F, the tamper evident feature should be functional within 1 minute of application. Other surfaces or lower temperatures may require more curing time. If the tamper evident feature does not perform immediately, more curing time usually improves the performance of the tamper evident feature. For best results, allow 1 hour curing time after application. General Minimum Application Temperature: +40°F. General Service Temperature Range: -40°F to +160°F. Storage: 1.Storage Temperature: 40°F to 100°F. 2.Storage Humidity: 20% to 60%. 3.Minimum Shelf Life: 2 Years. If relevant - to record the number of the sealing label and its color.