TAKHRWOD Electronic Cabinet Lock, Cabinets Hidden DIY Lock, Hidden DIY for Wooden Drawer Cabinet RFID Card/Tag/Wristband Entry 1set(Grey)

Note: The lock will automatically unlock (pop open) shortly before batteries go dead. Before that, low power alarm alerts. So, don’t worry about being locked out.Please set up the admin card and user cards to use,Read the user manual, with detailed introduction. ?, Features: ?SUITABLE FOR WOODEN CABINETS - RFID cards can work for 1.5" (max.) thick wood cabinet, and RFID tags can transmit through 1.2" (max.) wood.. ? The lock is programmable, to reset, add or delete keys freely. ? Two Unlock Modes: Single Unlock Mode, Dual Unlock Mode. ?Powered by 2x AA 1.5V batteries (not included). ? The batteries can last 8-12 months under normal use. ? Unlock automatically shortly before batteries go dead. ? The sound alarm will alert when the battery power is low. ?, Operation Instructions 1:Reset Install 2x AA 1.5V Batteries. Press the Reset button until a long beep. 2:Set Up Admin Card After resetting the lock, swipe a RFID card/fob, this first card is configured as the Admin Card. 3:Set Up User Card Swipe the admin card. Then swipe new cards, which you want to add as user ard within the beeps. 4:Delete Card To delete all user cards: swipe the admin card 3 times.To delete all admin and user cards: same as Reset. ?,Low Voltage Alarm When you swipe the card to unlock, the voice alarm will alert (you can hear a long beep) if the battery power is low. You still can swipe card to unlock for 50 times max. Please replace the batteries ASAP. Package Includes: 1,User manual. 2, Installation Template. 3,Button setter. 4, lock. 5, Latch. 6, Mounting screws. 7,Induction Location Decal. 8,3M-tape. 9,RFID Key-fobs. 10, RFID Cards.