Tabpole Wood Humidity Tester Digital Wood Moisture Meter Timber Damp Tester with Temperature Display

Descriptions: This simple-to-use moisture meter has hardened steel pins which are pushed into wood or other materials to be measured to obtain a reading of moisture content on the LCD screen. The pins are protected by a plastic cover when not in use. Caution: The electrode measurement pins are extremely sharp. Please use with care when handling this instrument. Cover the pins with the protective cap when not in use. Wood Group & Wood Species: A: Teak, Walnut, Afrormosia, Rubber Tree, Imbuia, Kokrodua, Niove Bidinkala, Cork B: Keruing, White Poplar, Beech, Cedar, Tola C: Lauan, Ash, Elm, Fir, Maple, Padauk, Oak, Cherry D: Basswood, Larch, Pine, Birch Measurement Instructions: 1. Remove the battery cover, install batteries and press power button once to start the machine. 2. Remove the cap to expose the needle electrodes. 3. Select the appropriate wood calibration scale A, B, C, D by pressing "MODE" button. 4. Push the needle pins into the wood and observe the reading. Press "Hold" key once to hold the reading display.  5. Read the current ambient temperature. Press C/F switch key to switch between the Degrees Celsius and Fahrenheit 6. Turn OFF the instrument. Specification: Principle: Electrical resistance Wood Moisture Measuring Range: 4~75% Resolution: 0.1% Accurancy: ±0.5% Electrode Length: 10mm(0.4") Electrode Pins: Integrated Auto Power OFF: After approx.5 minutes Power Supply: 2*AAA batteries(not included) Product Size: 144 x 64 x 31mm (5.7" x 2.5" x 1.2") Material: ABS Plastic Color: Grey