T316 Marine Grade Stainless Steel Handed Thread Swage Lag Screws Left and Right for 1 8 inch Stair Railing Deck Railing and Cable Railing Kit DIY Baluster Hardware with Wrench 24 Pcs

WHY CHOOSE US? MATERIAL T316 marine grade stainless steel PACKING LIST · Left Handed Thread Lag Screw?12 Pcs · Right Handed Thread Lag Screw?12 Pcs · OD drill bit?1 Pcs · Wrench: 1 Pcs APPLICATION The High-quality stainless steel swage lag screws are suitable for 1/8" OD cable railing systems, and are suitable for horizontal and vertical installation for a clean look. These swage lag screws solve the troubles of cable twisting well. Ideal for indoor or outdoor railing system applications. SIZE Overall Length: 4" Thread Length: 2" Hole Size: 1/8" INSTALLATION STEPS Step 1: We divide the height of the post on both into equal lengths and mark them. Starting from one side of the post, drill holes with 5mm bit on the mark. Use a wrench to screw about half the depth of the thread into the holes. Same installation on the other side. Step 2:Measure the distance for the 2 wood post surface.The length of cable should be 1''-1.5 '' shorter than the distance of the two posts; so measure and mark the cable length according to the distance, then cut it with cutter. Step 3:Put the cables into the terminals on both sides. Use hydraulic crimping tool to crimp twice or thrice to fix the cables and avoid loosening of the cables. Step 4:Turn the Left & Rights screws thread in the same direction with our wrench to tighten the cables. If you have any troubles during installation, pls contact us. We will provide you with technical support. ATTENTION The cable length should be 1.3 inches shorter than the edge of the wood post. If you have any questions about it, pls contact us. We will provide technical support for you.