Drive Style : Socket
Drive Size : 7/16"
Thread Size : 1/4-28
Material : Stainless Steel 304
Quantity of Fasteners in Package : 25
Width - Flat to Flat : 7/16"
Height / Thickness : 0.234"
Width - Point to Point : 0.505"
Threads Per Inch (TPI) : 28
Flange Diameter : 0.625"
Coarse or Fine Thread : Fine
Thread Direction : Right Hand
Lock nut is a round nut, and in its outer open four small slot, you can use the crescent wrench screw on the stud, the lock nut should be equipped with a shaft washer, it can be used to make the small groove on the stud and its peripheral groove relative to the fixed, to prevent its loose
Bolt thread on the nuts embedded in the extrusion, making the deformation, after installation, and thread completely squeeze contact, the extruded to the bolt a lot of resilience, increased friction, so that the bolt is not easy to loose
Lock nuts for stainless steel bolts are highly resistant against turning, preventing the lock nuts from weakening and loosening under vibration and torque which reduces the strength of hold
Made with industrial-strength material capable enough to replace lock washers and prevent bolts from being exposed and coming out providing better security and firm hold
If you are experiencing galling, slow down installation speed, wait for heat to disperse, and apply a lubricant
It is used as a type of locknut, where it is "jammed" up against a standard nut to lock the two in place
Lock nuts generate a large amount of friction and heat during installation
Performs better compared to lock washers as it is made out of non-corrosive material
It is also used in situations where a standardnut would not fit
A jam nut is a high profile type of nut
T Nuts Flange Nut Assortment T Nut Hex Nuts Stainless Steel Washers Lock Nuts Hex Nut Stainless Steel Lock Locking Nut Stainless Steel Flange Serrated 1 4-28 -25 Pcs- Super-Deals-Shop
Was:
$93.78
Now:
$46.89
- SKU:
- NT102866
- UPC:
- 653829564040
- Condition:
- New
- Availability:
- Free Shipping from the USA. Estimated 2-4 days delivery.