97PCS Dent Puller Kit Dent Removal Tool Kit, Car Dent Puller with Golden Lifter, Slide Hammer T-bar Dent Puller, Bridge Puller, Suction Cup and Glue Gun for Cars
With their mechanics-tested design, even individuals with limited experience can confidently handle dent repairs. By choosing our dent puller kit, you can save both time and money while effortlessly restoring your vehicle's appearance
Gold dentlifuer
Clean damaged surfaces with a clean, damp cloth.
Insert the glue stick into the glue gun, heat for about 3-6 minutes and apply the glue.
Wait for 2-3 minutes, when the glue cools down and has residual temperature, use the gold dent lifter and adjust its height to repair dents.
Repeat the above steps until the dent pop up.
Spray 95% alcohol on remaining glue and scrape it off with a shovel after 1-2 minutes.
Bridge dent puller
1.Apply hot melt adhesive to the puller
2.Stick to the indentation press for about 10 seconds
3.Installation the puller once the gel has been fixed
4.Remove the gel with a spatula after the repair
T-bar dent puller
1. Clear the surface with a wet cloth.Insert the glue stick into the glue gun, heat for about 3-6 minutes and apply the glue
2. Stick to the dent
3. Installation of pull tabs
4.Pulling the puller to repair dents