Swivel Adapter for SmoKing Smoke Detector Tester w Magnet Tester

This handy device 3d printed in the United States gives users of the SmoKing Smoke Detector Tester the ability to test devices at an angle. It threads on to any standard size extension pole or broom handle and the testing cup device is inserted into the top. It also has two magnets on either size to test smoke detectors using this method. Extra rubber bands also included. Note: Magnets are not advised to test the functionality of smoke detectors and is not an acceptable testing method as per fire code...as such, we accept no responsibility for fire alarms/smoke detectors tested in this manner. NFPA 72, Chapter 14 Table 14.4.3.2. (g) (2013 Edition) “Smoke detectors/smoke alarms shall be tested in place to ensure smoke entry into the sensing chamber and an alarm response.” CAN/ULC-S536-04, 5.7.4.1.2 “Each detector shall be tested for operation by introducing smoke or simulated smoke into the detecting chamber”