Swgrdin 3D Touch Screen Assembly for iPhone 8 Plus Screen Replacement White 5.5", Display Digitizer Frame for iPhone 8 Plus LCD Replacement Tool Kits with Screen Protector, A1864, A1897, A1898

The Swgrdin lcd screen replacement is just for Iphone8 plus, A1864, A1897, A1898. Please ensure it compatible with your shopping requirement. Attention: a)If the screen gets cracked or shatterred, stick tape on the cullet in case of scratching hand b)Power off before dismantlement. c)Choose correct screwdrivers to open the screws. Put the screws in the box in case that they may be missing. d)Need to remark the screws and flex cables, then remember their original positions. Another phone can shoot video to record everything. e)When taking apart the phone, firstly, disconnect the power flex cable to prevent electrostatic breakdown circuit and short circuit. f)When grabbing flex cable and other parts, try to grab them with tweezers instead of fingers. g)Disassemble the home button carefully, it is easy to be broken. h)Avoid to pull the flex cable too hard. i)Do not press LCD hard, it is easy to damage. j)Do not forget to test the LCD before installation. Notes: A)If the auto-brightness is not available, please confirm the iphone system has been updataed to IOS 12, because iphone prohibits this function after screen replacement in previous IOS system. B)If your phone meet with the problems, such as lines on screen, cannot turn on, flash, touch insensitive, etc, please follow steps below: 1.Check the replacement screen to ensure the flex cables are in good condition and no chippings on the interface. 2.Reconnect the flex cables from the motherboard side. 3.Get it charged for minutes and then reboot it. 4.Put the phone in dry environment for hours. Static electricity maybe result in this condition after installing. You just need to leave it alone for a night. Internal Packing: 1 x lcd screen digitizal for iPhone 8p (5.5 inch) 1 x temperred glass screen protector 1 x professional Tools Kit